Comment Sought on Motorola Petition to Extend 25 KHz Equipment Waiver
Federal Communications CommissionNews Media Information 202 / 418-0500
445 12th St., S.W.
Fax-On-Demand 202 / 418-2830
Washington, D.C. 20554TTY 202 / 418-2555
Released: December 7, 2012
WIRELESS TELECOMMUNICATIONS BUREAU, PUBLIC SAFETY AND HOMELAND
SECURITY BUREAU AND OFFICE OF ENGINEERING AND TECHNOLOGY SEEK
COMMENT ON MOTOROLA REQUEST FOR LIMTED WAIVER OF SECTION 90.203(J)(10)
OF THE COMMISSION’S RULES
WT Docket No. 99-87
Comment Date: December 17, 2012
Reply Comment Date: December 26, 2012
By this Public Notice, comment is sought on the Request for Limited Waiver filed by Motorola
Solutions, Inc. (Motorola) on November 29, 2012.1 Motorola seeks a limited waiver of Section
90.203(j)(10) of the Commission’s Rules, which provides that, after January 1, 2011, Part 90 equipment
in the 150-174 MHz and 421-512 MHz band that operates with a maximum channel bandwidth greater
than 12.5 kHz shall not be manufactured in, or imported into, the United States. In 2010, the Commission
temporarily waived this requirement until January 1, 2013 in order to avoid any disruption to licensees
operating in a 25 kHz mode between January 1, 2011 and the Commission’s January 1, 2013 deadline for
migrating to narrowband technology. 2 The proponents of the temporary waiver argued that it would be
contrary to the public interest to prevent licensees from keeping 25 kHz systems in full working order
until they complete the migration to narrowband technology.3
Motorola, a Part 90 equipment manufacturer, requests that the deadline for manufacture or
importation of equipment capable of operating with a maximum channel bandwidth greater than 12.5 kHz
be further extended to allow the continued manufacture and importation of 25 kHz-capable equipment for
marketing and sale to those licensees granted waivers of the Commission’s January 1, 2013
narrowbanding deadline. It states that grant of the requested limited waiver will serve the public interest
by ensuring that those licensees maintain essential system interoperability and reliability during their
narrowbanding transition. Motorola contends that new 25 kHz-capable equipment will need to be
1 See Request of Limited Waiver (filed November 29, 2012).
2 See Implementation of Sections 309(j) and 337 of the Communications Act of 1934 as Amended, Order, WT
Docket No. 99-87, 25 FCC Rcd 8861 (2010) (Order). The January 1, 2013 deadline for converting to 12.5 kHz
technology has been waived for licensees in the 470-512 MHz segment of the UHF band (the T-Band). See
Implementation of Sections 309(j) and 337 of the Communications Act of 1934 as Amended, Order, WT Docket
No. 99-87, 27 FCC Rcd 4213 (WTB/PSHSB/OET 2012), on reconsideration, Order on Reconsideration, DA 12-
1743 (WTB/PSHSB/OET rel. Nov. 30, 2012).
3 See Order, 25 FCC Rcd at 8864 ¶ 8.
manufactured after January 1, 2013 to ensure that the systems of waiver recipients remain in full working
order until their migration to narrowbanding technology is complete, because a necessary component of
maintaining essential system reliability is the ability of a licensee to purchase customized, newly-
manufactured equipment when current equipment fails. Motorola claims that strict application of the
manufacturing ban would hinder the ability of licensees, who received waiver requests, to procure the
necessary equipment during the migration to narrowband technology and could interrupt critical public
safety communication needs. It proposes the following limited waiver of Section 90.203(j)(10): (a) the
waiver will apply to all manufacturers of 25 kHz-capable equipment in 150-174 MHz and 421-470 MHz
bands, (b) only those licensees who have been granted a waiver would be able to purchase newly-
manufactured or -imported 25 kHz-capable equipment, (c) the length of the waiver on the manufacture
and importation of equipment to meet the requirement of a waiver recipient would be the same as the
duration of the waiver from the narrowbanding deadline for that entity, and (d) the limited waiver would
not affect the prohibition on the manufacture and importation of 25 kHz-capable equipment for licensees
that did not receive a narrowbanding waiver.
We seek comment on Motorola’s waiver request. Commenters should address whether the public
interest would be served by granting a limited waiver to allow the continued manufacture and importation
of 25 kHz-capable equipment for the marketing and sale to those licensees granted a waiver of the
Commission’s January 1, 2013 narrowbanding deadline. We also ask commenters to discuss whether a
blanket waiver is the best means of providing the necessary relief, or whether relief should instead be
requested on a case-by-case basis by licensees granted waivers of the narrowbanding deadline that
encounter difficulty procuring needed 25 kHz-capable equipment. In addition, commenters should
discuss what steps the Commission can take to ensure that, if granted, such a waiver allowing the
manufacture and importation of 25 kHz-capable equipment beyond January 1, 2013 does not prolong the
transition of licensees to narrowband technology. For example, should it be a condition of any waiver
that 25 kHz-capable equipment manufactured or imported after January 1, 2013 be rendered incapable of
operation by the end user in the 25 kHz mode after the expiration of the licensee’s narrowbanding
Procedural MattersInterested parties may file comments and reply comments in response to the waiver request on or
before the dates listed on the first page of this Public Notice. All pleadings must reference WT Docket
No. 99-87. Parties may file comments using (1) the Commission’s Electronic Comment Filing System
(ECFS), (2) the Federal Government’s eRulemaking Portal, or (3) by filing paper copies.4
Electronic Filers: File comments electronically using the Internet by accessing the ECFS:
http://www.fcc.gov/cgb/ecfs/ or the Federal eRulemaking Portal: http://www.regulations.gov.
Filers should follow the instructions provided on the website for submitting comments.
In completing the transmittal screen, filers should include their full name, U.S. Postal Service
mailing address, and the applicable docket or rulemaking number. Parties may also submit an
electronic comment by Internet e-mail. To get filing instructions, filers should send an e-mail to
firstname.lastname@example.org, and include the following words in the body of the message, “get form.” A sample
form and directions will be sent in response.
Paper Filers: Parties who choose to file by paper must file an original and two copies of each
Send filings by hand or messenger delivery, by commercial overnight courier, or by first-class or
overnight U.S. Postal Service mail (although we continue to experience delays in receiving U.S. Postal
Service mail). Address filings to the Commission’s Secretary, Office of the Secretary, Federal
4 See Electronic Filing of Documents in Rulemaking Proceedings, Report and Order, GC Docket No. 97-113, 13
FCC Rcd 11322 (1998).
Deliver hand-delivered or messenger-delivered paper filings to FCC Headquarters at 445
12th St., SW, Room TW-A325, Washington, DC 20554 between 8:00 AM and 7:00 PM.
Use rubber bands or fasteners to hold deliveries together. Dispose of all envelopes before
entering the building.
Send commercial overnight mail (other than U.S. Postal Service Express Mail and
Priority Mail) to 9300 East Hampton Drive, Capitol Heights, MD 20743.
Send U.S. Postal Service first-class, Express, and Priority mail to 445 12th Street, SW,
Washington DC 20554.
Parties are requested to send one copy of their comments and reply comments to Best Copy and
Printing, Inc., Portals II, 445 12th Street, S.W., Room CY-B402, Washington, D.C. 20554, (800) 378-
3160, e-mail FCC@BCPIWEB.com.
The request, and comments and reply comments filed in response to this Public Notice are
available for viewing via the Commission's Electronic Comment Filing System (ECFS) by entering the
WT 99-87. The documents also will be available for public inspection and copying
during business hours in the FCC Reference Information Center, Portals II, 445 12th Street S.W., Room
CY-A257, Washington, D.C. 20554. They may also be purchased from Best Copy and Printing, Inc.,
telephone (800) 378-3160, facsimile (202) 488-5563, TTY (202) 488-5562, e-mail
Documents in WT Docket No. 99-87 are available for viewing on ECFS,
http://www.fcc.gov/cgb/ecfs, by entering the docket number, WT 99-87. These documents are
available for public inspection and copying during business hours at the FCC Reference Information
Center, Portals II, 445 12th St. SW, Room CY-A257, Washington, D.C. 20554. The documents are also
available for purchase from Best Copy and Printing, Inc., telephone (800) 378-3160, facsimile (301) 816-
0169, e-mail FCC@BCPIWEB.com., telephone (202) 488-5300, facsimile (202) 488-5563, TTY (202)
488-5562, e-mail email@example.com.
Alternate formats of this Public Notice (computer diskette, large print, audio recording, and
Braille) are available to persons with disabilities by contacting the Consumer & Governmental Affairs
Bureau at (202) 418-0530 (voice), (202) 418-0432 (TTY), or send an e-mail to firstname.lastname@example.org.
This proceeding has been designated as a “permit-but-disclose” proceeding in accordance with
the Commission's ex parte rules.5 Persons making ex parte presentations must file a copy of any written
presentation or a memorandum summarizing any oral presentation within two business days after the
presentation (unless a different deadline applicable to the Sunshine period applies). Persons making oral
ex parte presentations are reminded that memoranda summarizing the presentation must (1) list all
persons attending or otherwise participating in the meeting at which the ex parte presentation was made,
and (2) summarize all data presented and arguments made during the presentation. If the presentation
consisted in whole or in part of the presentation of data or arguments already reflected in the presenter’s
written comments, memoranda or other filings in the proceeding, the presenter may provide citations to
such data or arguments in his or her prior comments, memoranda, or other filings (specifying the relevant
page and/or paragraph numbers where such data or arguments can be found) in lieu of summarizing them
in the memorandum. Documents shown or given to Commission staff during ex parte meetings are
deemed to be written ex parte presentations and must be filed consistent with rule 1.1206(b). In
proceedings governed by rule 1.49(f) or for which the Commission has made available a method of
electronic filing, written ex parte presentations and memoranda summarizing oral ex parte presentations,
and all attachments thereto, must be filed through the electronic comment filing system available for that
proceeding, and must be filed in their native format (e.g., .doc, .xml, .ppt, searchable .pdf). Participants in
this proceeding should familiarize themselves with the Commission’s ex parte rules.
For further information, contact Mr. Melvin Spann of the Wireless Telecommunications Bureau
at (202) 418-1333, or via e-mail at Melvin.Spann@fcc.gov or Mr. Roberto Mussenden of the Public
5 See 47 C.F.R. §§ 1.1200(a), 1.1206.
Safety and Homeland Security Bureau at (202) 418-1428, or via e-mail at Roberto.Mussenden@fcc.gov
or Mr. Ira Keltz of the Office Of Engineering and Technology at (202) 418-0616, or via e-mail at
Action by the Wireless Telecommunications Bureau, Public Safety and Homeland Security
Bureau and Office of Engineering and Technology.
- FCC -
Note: We are currently transitioning our documents into web compatible formats for easier reading. We have done our best to supply this content to you in a presentable form, but there may be some formatting issues while we improve the technology. The original version of the document is available as a PDF, Word Document, or as plain text.