Skip Navigation

Federal Communications Commission

English Display Options

FCC Encyclopedia

IBOC Digital Radio Broadcasting for AM and FM Radio Broadcast Stations

The FCC has approved In-Band On-Channel (IBOC) digital radio operation for AM (daytime and nighttime) and FM broadcast stations.

Current Information for Licensees

  •  To obtain a list of stations authorized for "hybrid" operation (analog + digital signals), select one of the following links: [ AM | FM ].
     
  • Guidance Provided to FM Licensees Regarding Operations with Increased Digital Power (MM Docket No. 99-325), Public Notice, MM Docket 99-325, DA 10-866, released May 17, 2010.  [ PDF | Word ]. 
     
  • Digital power increase for FM stations approved.  Digital Audio Broadcasting Systems and Their Impact on the Terrestrial Radio Broadcast Service, Order, MM Docket 99-325, DA 10-208, released January 29, 2010.  [ PDF | Word ].  FM stations operating in excess of the station's authorized class may use the FM Super-Powered Maximum Digital ERP Calculator.  Other FM stations, see the Order for the calculation procedure.  News Release summary, [ PDF | Word ], released January 29, 2010.  Procedure for Filing STA Requests for Increased Digital FM Power.

What Is IBOC Digital Radio?

IBOC refers to the method of transmitting a digital radio broadcast signal centered on the same frequency as the AM or FM station's present frequency.  For FM stations, the transmission of the digital signal occupies the sidebands above and below the center FM frequency (e.g., 97.9 MHz).  AM band transmissions also place the digital signal in sidebands above and below the existing AM carrier frequency.  By this means, the AM or FM station digital signal is transmitted in addition to the existing analog signal.  In both instances, the digital emissions fall within the spectral emission mask of the AM or FM channel (see 47 CFR Sections 73.44 and 73.317).

The present IBOC system is referred to as a "hybrid" since it is neither fully analog nor fully digital.  During hybrid operation, existing receivers still continue to receive the analog (non-digital) signal.  New receivers will incorporate both modes of reception, where the receiver will automatically switch to the analog signal if the digital signal cannot be decoded or is lost by the receiver.

Technical information about IBOC can be found on Ibiquity's website, http://www.ibiquity.com/.


Improved Quality of IBOC Digital Radio

IBOC digital radio provides near CD quality reception for stations operating in the FM broadcast band.  For AM stations, IBOC digital radio provides reception approximately equal to today's analog FM reception. Minimal impact is anticipated on reception of existing service. 

Where Can I Obtain a Digital Receiver?

The pace of development of IBOC digital receivers for consumers depends on a number of factors, including how fast and how many AM and FM stations commence digital broadcasting, and how soon receiver manufacturers can produce radio receivers.  Check with local electronics suppliers from time to time for the latest models of digital radio receivers!


How Do I Know Whether a Station Transmits a Digital Signal?

An AM or FM licensee is required to provide written notification to the FCC within 10 days of commencing digital/analog hybrid operation.  This notice must be provided by the station's electronic filing of FCC Form 335-AM or 335-FM in the FCC's CDBS Electronic Filing System.  A "Digital Status" search field within the Station Information form in CDBS can help you identify which stations are operating in hybrid mode.  Also, an AM or FM station itself will announce if its operations include transmission of the digital signal. 

For More Information

You can e-mail questions about IBOC digital radio to Susan Crawford at Susan.Crawford@fcc.gov. Or, you may call the Audio Division at 202-418-2700.

Commission documents relating to IBOC digital radio are contained in MM Docket 99-325: [ EDOCS | ECFS ].

FCC > Media Bureau > Audio Division

close
FCC

You are leaving the FCC website

You are about to leave the FCC website and visit a third-party, non-governmental website that the FCC does not maintain or control. The FCC does not endorse any product or service, and is not responsible for, nor can it guarantee the validity or timeliness of the content on the page you are about to visit. Additionally, the privacy policies of this third-party page may differ from those of the FCC.