Skip Navigation

Federal Communications Commission

English Display Options

Guide

Digital-to-Analog Converter Box Setup (Basic with twin-lead antenna)

twin-lead antenna wireThis guide describes installation of a digital-to-analog-converter box if your TV set has twin-lead terminals for attaching the antenna, instead of a coaxial connector plug or port.

Supplies: You will need your analog TV, the antenna you have been using (indoor or outdoor), the twin-lead wire that currently connects your antenna to your TV, and two adaptors or "matching transformers" as shown below. Before you begin the installation of the converter box, you should unplug the power from your TV.

Step  step 1  Unscrew the existing twin-lead antenna wire from your TV "Antenna In" twin-lead terminals.

picture of existing anntenna attached to back of tv

Step step 2 Attach the existing twin-lead antenna wire to the twin-lead terminals on the twin-lead adaptor (like the image below). Then plug the adaptor's coaxial connector into the "Antenna In (RF)" port on the Converter Box.

 

twin-lead adaptor

picture of antenna being attached to back of converter box (in)

Step step 3  Using coaxial wire, plug one end into the "Out To TV (RF)" port on the Converter Box. Plug the other end into the coaxial port on the coaxial adaptor. Then attach the twin-lead output of the coaxial adaptor to your TV "Antenna In" twin-lead terminals.

 

Coaxial adaptor

picture of converter box being attached to back of TV (antenna in)

Step step 4 Plug the power cords on your Converter Box and TV into a power outlet, and turn on your TV and Converter Box. Using the instructions that come with your Converter Box, tune your TV to channel 3 or 4. Using the remote that comes with your Converter Box, follow the on-screen set-up guide to scan for available DTV channels, and begin enjoying the benefits of Digital Television!

  • If your Converter Box includes an "analog pass-through" feature, this set up will also allow you to receive any stations that still broadcast in analog in your area. Follow the instructions that come with your Converter Box for how to tune analog channels. 
  • For instructions on how to connect your converter box if it does not include an analog pass-through feature or for instructions on connecting your converter box to other components such as a VCR, go to www.fcc.gov/digital-television or contact the FCC by calling 1-888-CALL-FCC (1-888-225-5322) voice or 1-888-TELL-FCC (1-888-835-5322) TTY.

For More Information

For more information about the DTV transition visit our DTV website. For information about this and other communications issues, visit the FCC’s Consumer website or contact the FCC’s Consumer Center by calling 1-888-CALL-FCC (1-888-225-5322) voice or 1-888-TELL-FCC (1-888-835-5322) TTY; faxing 1-866-418-0232; or writing to:

Federal Communications Commission
Consumer and Governmental Affairs Bureau
Consumer Inquiries and Complaints Division
445 12th Street, SW
Washington, DC 20554

Print Out

Digital-to-Analog Converter Box Setup (Basic with twin-lead antenna) Guide (pdf)

close
FCC

You are leaving the FCC website

You are about to leave the FCC website and visit a third-party, non-governmental website that the FCC does not maintain or control. The FCC does not endorse any product or service, and is not responsible for, nor can it guarantee the validity or timeliness of the content on the page you are about to visit. Additionally, the privacy policies of this third-party page may differ from those of the FCC.