All full power television stations in the U.S. are now broadcasting in digital only. A consumer has three options for watching a digital broadcast: 1. get a digital to analog converter box to connect to an existing older analog set along with your antenna; 2. subscribe to cable, satellite, or other pay TV service; 3. have a digital television set with an antenna.

What is a Channel Scan?

Installing a converter box or setting up a DTV-ready television is only the first part of the process. After hooking up a converter box to your TV set or installing a new digital television, you will need to scan for new channels to ensure you receive all the digital stations broadcasting in your area. While some boxes do this automatically, you may need to select “scan” manually.

You should rescan on a periodic basis to get all of the digital programming available.

How do I Perform a Channel Scan?

  • Run the “scan” function on your converter box or digital television set, usually on the remote control, labeled “set-up” or “menu” or some similar term. Consult the owner’s manual for more detailed instructions on how to run a channel scan.
  • Once the scan is complete, you should be receiving digital channels through your antenna.

Perform a channel scan periodically to check for new digital channels in your area.

Print Out

Rescan for Digital TV Channels Guide (pdf)

 

File a Complaint with the FCC

 

Visit our Consumer Complaint Center at consumercomplaints.fcc.gov to file a complaint or tell us your story.

Request Accessible Format

To request this article in an accessible format - braille, large print, Word or text document or audio - email fcc504@fcc.gov, or write the address or call the phone number at the bottom of this page.

Consumer Help Center

Learn about consumer issues - visit the FCC's Consumer Help Center at www.fcc.gov/consumers.

 

Date Last Updated/Reviewed: 
Tuesday, November 1, 2016