Many federal agencies have considered the important issue of determining safe levels of exposure to radiofrequency (RF) energy. In addition to the Federal Communications Commission, federal health and safety agencies such as the Environmental Protection Agency (EPA), the Food and Drug Administration (FDA), the National Institute for Occupational Safety and Health (NIOSH) and the Occupational Safety and Health Administration (OSHA) have been actively involved in monitoring and investigating issues related to RF exposure. For example, the FDA has issued guidelines for safe RF emission levels from microwave ovens, has reviewed scientific literature of relevance to RF exposure (see fda.gov/media/135043/download), and continues to monitor exposure issues related to the use of certain RF devices such as cell phones. Likewise, NIOSH conducts investigations and health hazard assessments related to occupational RF exposure.
Federal, state and local government agencies and other organizations have generally relied on RF exposure standards developed by expert non-governmental organizations such as the Institute of Electrical and Electronics Engineers (IEEE) and the National Council on Radiation Protection and Measurements (NCRP). Since 1996, the FCC has required that all wireless communications devices sold in the United States meet its minimum guidelines for safe human exposure to radiofrequency (RF) energy. The FCC’s guidelines and rules regarding RF exposure are based upon standards developed by IEEE and NCRP and input from other federal agencies, such as those listed above.
For wireless devices intended for use near or against the body (such as cell phones, tablets and other portable devices) operating at or below 6 GHz, these guidelines specify exposure limits in terms of Specific Absorption Rate (SAR). The SAR is a measure of the rate that RF energy is absorbed by the body. For exposure to RF energy from wireless devices, the allowable FCC SAR limit is 1.6 watts per kilogram (W/kg), as averaged over one gram of tissue.
For wireless devices operating in the frequency range above 6 GHz, the guidelines specify power density as the relevant RF exposure limit. Power density is defined as an amount of RF power per unit area. Existing power density limits apply for whole-body exposure, but power density limits for localized exposure are being considered (see the Notice of Proposed Rulemaking in ET Docket No. 19-226, FCC 19-126).
All wireless devices sold in the US go through a formal FCC approval process to ensure that they do not exceed the exposure limits when operating at the device’s highest possible power level. If the FCC learns that a device does not conform with the test report upon which FCC approval is based – in essence, if the device in stores is not the device the FCC approved – the FCC can withdraw its approval and pursue enforcement action against the appropriate party. For more information on device testing and SAR for cell phones, go to fcc.gov/consumers/guides/specific-absorption-rate-sar-cell-phones-what-it-means-you.
Several US government agencies and international organizations work cooperatively to monitor research on the health effects of RF exposure. According to the FDA and the World Health Organization (WHO), among other organizations, to date, there is no consistent or credible scientific evidence of health problems caused by the exposure to radio frequency energy emitted by cell phones. The FDA further states that “the weight of the scientific evidence does not support an increase in health risks from radio frequency exposure from cell phone use at or below the radio frequency exposure limits set by the FCC” (see fda.gov/radiation-emitting-products/cell-phones/scientific-evidence-cell-phone-safety). The FDA maintains a website on RF issues at fda.gov/Radiation-EmittingProducts/RadiationEmittingProductsandProcedures/HomeBusinessandEntertainment/CellPhones/default.htm.
The WHO has established an International Electromagnetic Fields Project (IEFP) to provide information on health risks, determine research needs and supports efforts to harmonize RF exposure standards. The WHO provides additional information on RF exposure and mobile phone use at who.int/mediacentre/factsheets/fs193/en/index.html. For more information on the IEFP, go to who.int/peh-emf/en.
Some health and safety interest groups have interpreted certain reports to suggest that wireless device use may be linked to cancer and other illnesses, posing potentially greater risks for children than adults. While these assertions have gained increased public attention, currently no scientific evidence establishes a causal link between wireless device use and cancer or other illnesses. Those evaluating the potential risks of using wireless devices agree that more and longer-term studies should explore whether there is a better basis for RF safety standards than is currently used. The FCC closely monitors all of these study results. However, at this time, there is no basis on which to establish a different safety threshold than our current requirements.
You can find additional useful information on the FCC’s website at www.fcc.gov/rfsafety and links to some of the other responsible organizations at fcc.gov/engineering-technology/electromagnetic-compatibility-division/radio-frequency-safety/faq/rf-safety#Q28.
What You Can Do
Even though no scientific evidence currently establishes a definitive link between wireless device use and cancer or other illnesses, and even though all such devices must meet established federal standards for exposure to RF energy, some consumers are skeptical of the science and/or the analysis that underlies the FCC’s RF exposure guidelines. Accordingly, some parties recommend taking measures to further reduce exposure to RF energy. The FCC does not endorse the need for these practices, but provides information on some simple steps that you can take to reduce your exposure to RF energy from cell phones. For example, wireless devices typically emit more RF energy when you are using them. The closer the wireless device is to your body, the more energy you will absorb.
Some measures to reduce your RF exposure include:
- Reduce the amount of time spent using your wireless device.
- Use a speakerphone, earpiece or headset to reduce proximity to the head (and thus head exposure). While wired earpieces may conduct some energy to the head and wireless earpieces also emit a small amount of RF energy, both wired and wireless earpieces remove the greatest source of RF energy (the cell phone or handheld device) from proximity to the head and thus can greatly reduce total exposure to the head.
- Increase the distance between wireless devices and your body.
- Consider texting rather than talking - but don’t text while you are driving.
Some parties recommend that you consider the reported SAR value of wireless devices. However, comparing the SAR of different devices may be misleading. First, the actual SAR varies considerably depending upon the conditions of use. In particular, while cell phones are tested at their maximum power levels to ensure safety under even the most severe operating conditions, they will typically operate at much lower power levels resulting in RF exposures much lower than the reported SAR values. Cell phones constantly vary their power to operate at the minimum power necessary for communications; operation at maximum power occurs infrequently. Second, the reported highest SAR values of wireless devices do not necessarily indicate that a user is exposed to more or less RF energy from one cell phone than from another during normal use (see our guide on SAR and cell phones at fcc.gov/guides/specific-absorption-rate-sar-cell-phones-what-it-means-you). Third, the variation in SAR from one mobile device to the next is relatively small compared to the reduction that can be achieved by the measures described above.
Consumers should remember that all wireless devices are certified to meet the FCC’s maximum SAR limits. These limits incorporate a considerable safety margin. Information about the maximum SAR value for each phone is publicly available on the FCC website at fcc.gov/general/specific-absorption-rate-sar-cellular-telephones, and may be provided with device documentation or by dialing *#07# on certain models. Additional guidance on reducing RF exposure from cell phones is available on the FDA website at fda.gov/radiation-emitting-products/cell-phones/reducing-radio-frequency-exposure-cell-phones.
While current research indicates that cell phones do not seem to pose a significant health problem for pacemaker wearers, some studies have shown that wireless devices might interfere with implanted cardiac pacemakers if used within eight inches of the pacemaker. Pacemaker wearers may want to avoid placing or using a wireless device this close to their pacemaker. Additional information on potential cell phone interference with pacemakers and other medical devices is available on the FDA website at fda.gov/radiation-emitting-products/cell-phones/potential-cell-phone-interference-pacemakers-and-other-medical-devices.
Wireless Devices and Health Concerns (pdf)
Alternate Format Requests
People with print disabilities may request braille, large print, or screen-reader friendly versions of this article via the email form at firstname.lastname@example.org. For audio and other access, use the "Explore Accessibility Options" link.
Consumer Help Center
Learn about consumer issues - visit the FCC's Consumer Help Center at fcc.gov/consumers
File a Complaint with the FCC
Visit our Consumer Complaint Center at consumercomplaints.fcc.gov to file a complaint or tell us your story.