Instructions

Plant Miles
Please enter the total strand miles of your plant. Your entry must be greater than zero.

Test Miles
Please enter the total strand miles tested. Your entry must be greater than or equal to 75% of the number in the "Total Miles" box.

Leaks
Please enter each Leak greater than or equal to 50uV/m @ 3 meters. Use the comma button to seperate each leak.(example: 50,60,70).

Corresponding Radius for Each Leak
FAILURE TO ENTER DATA CORRECTLY WILL RESULT IN A FALSE SUM. This box is for the 10LogI3000 measurement ONLY. You must enter the corresponding radius of each leak, which is measured from the center of the cable plant to the leakage source. (Example: If the leak 50 is the first entry in the Leaks >= 50uV/m @ 3m Box then the correspondinding radius of that leak must be first in this box.

Test Frequency
Please enter the Test Frequency used to conduct your Signal Leakage Test.The program will perform correlation automatically if this frequency is out of the VHF band.

 

Bureau/Office: